Polyaspartic – Perth Epoxy Supplies https://perthepoxysupplies.com.au Fri, 26 Aug 2022 02:27:15 +0000 en-AU hourly 1 https://wordpress.org/?v=6.6.1 PROTECH PT-3000 HIGH BUILD https://perthepoxysupplies.com.au/protech-pt-3000-high-build/?utm_source=rss&utm_medium=rss&utm_campaign=protech-pt-3000-high-build Fri, 26 Apr 2019 01:10:15 +0000 https://perthepoxysupplies.com.au/?p=1219 PT-3000 High Build  is a two-component, 91% volume solids, aliphatic polyaspartic coating system

The post PROTECH PT-3000 HIGH BUILD appeared first on Perth Epoxy Supplies.

]]>

What is Protech PT-3000 High Build?

PT-3000 High Build  is a two-component, 91% volume solids, aliphatic polyaspartic coating system.  It is recommended for use over suitably prepared concrete, plywood and steel surfaces as a decorative / protective coating system. It forms a waterproof membrane. It is also recommended as a topcoat for application over compatible aromatic polyurea, polyurethane and epoxy coatings.

Areas to use Protech PT-3000 High Build

  • Domestic Garages and driveways
  • Commercial and industrial concrete and plywood floors
  • Food processing operations
  • Cold storage area floors
  • Chemical plants
  • UV protective coating for compatible aromatic polyurea, polyurethane and epoxy coatings

Features

  • UV RESISTANT FOR Superior Gloss Retention
  • Good Abrasion Resistance
  • High Gloss Level
  • High Tensile Strength
  • Fast Cure
  • Contains UV Absorber
  • High Pigment loading possible provides excellent opacity
  • Ambient Application Temperature range: 2°C to 40°C
  • In – Service Temperature range: -15°C to +90°C

Technical Information

Technical Data & Application Sheet for Protech PT-3000 High Build

Material Safety Data Sheet for Protech PT-3000 High Build Polyaspartic Part A

Material Safety Data Sheet for Protech PT-3000 High Build Polyaspartic Part B

The post PROTECH PT-3000 HIGH BUILD appeared first on Perth Epoxy Supplies.

]]> PROTECH PT-3000 https://perthepoxysupplies.com.au/protech-pt-3000/?utm_source=rss&utm_medium=rss&utm_campaign=protech-pt-3000 Fri, 26 Apr 2019 01:04:37 +0000 https://perthepoxysupplies.com.au/?p=1211 PT-3000 is a two-component, 76% solids non-yellowing-type polyaspartic coating system.

The post PROTECH PT-3000 appeared first on Perth Epoxy Supplies.

]]>

What is PROTECH PT-3000?

PT-3000 is a two-component, 76% solids non-yellowing-type polyaspartic coating system.  It is recommended for use over suitably prepared concrete, plywood and steel surfaces as a decorative / protective coating system. It forms a waterproof membrane. It is also recommended as a topcoat for application over compatible aromatic polyurea, polyurethane and epoxy coatings.

Areas to use PT-3000 Polyaspartic

  • Domestic Garages and driveways
  • Commercial and industrial concrete and plywood floors
  • Food processing operations
  • Cold storage area floors
  • Chemical plants
  • UV protective coating for compatible aromatic polyurea, polyurethane and epoxy coatings

Features

  • UV RESISTANT FOR Superior Gloss Retention
  • Good Abrasion Resistance
  • High Gloss Level
  • High Tensile Strength
  • Fast Cure
  • Contains UV Absorber
  • High Pigment loading possible provides excellent opacity
  • Ambient Application Temperature range: 2°C to 40°C
  • In – Service Temperature range: -15°C to +90°C

Technical Information

Technical Data & Application Sheet for PT-3000 Polyaspartic

Material Safety Data Sheet for PT-3000 Polyaspartic Part A

Material Safety Data Sheet for PT-3000 Polyaspartic Part B

The post PROTECH PT-3000 appeared first on Perth Epoxy Supplies.

]]>