Perth Epoxy Supplies https://perthepoxysupplies.com.au Fri, 06 Sep 2024 06:18:57 +0000 en-AU hourly 1 https://wordpress.org/?v=6.6.1 Cleanpoxy 3100 Epoxy Resin https://perthepoxysupplies.com.au/cleanpoxy-3100/?utm_source=rss&utm_medium=rss&utm_campaign=cleanpoxy-3100 Wed, 27 Jan 2021 05:10:32 +0000 https://perthepoxysupplies.com.au/?p=1298 Cleanpoxy 3100 is a solvent bases two pack epoxy system. It has thinner properties than the DHDC 6400 which allows it applied further per L.

The post Cleanpoxy 3100 Epoxy Resin appeared first on Perth Epoxy Supplies.

]]>

Cleanpoxy 3100 is a solvent based two pack epoxy system. It has thinner properties than the DHDC 6400, which allows for it to be applied further per litre. It can also be applied as a pre tinted white or a pre tinted light grey colour, this product is also compatible with our range of epoxy colour tints. It is widely applied as a coating for interior areas that require dust proofing, stain resistance or where an improved internal UV resistance is desired

Where to use Cleanpoxy 3100 Epoxy Resin?

Use Cleanpoxy 3100 where a high level of chemical resistance, abrasion resistance & adhesion is required on the floor coating. Suitable for light duty traffic areas.

Technical Information

Technical Data Sheet – Cleanpoxy 3100

Part A Material Safety Data Sheet –Cleanpoxy 3100 

Part B Material Safety Data Sheet – Cleanpoxy 3100

The post Cleanpoxy 3100 Epoxy Resin appeared first on Perth Epoxy Supplies.

]]> Yegreena Color Floor Topcoat https://perthepoxysupplies.com.au/yegreena-color-floor-topcoat/?utm_source=rss&utm_medium=rss&utm_campaign=yegreena-color-floor-topcoat Mon, 15 Jun 2020 08:00:27 +0000 https://perthepoxysupplies.com.au/?p=1321 Yegreena Color Floor Topcoat is a top coat in two coat epoxy system for metallic colours. It has properties that allow it to mix with the metallic & pearl pigment

The post Yegreena Color Floor Topcoat appeared first on Perth Epoxy Supplies.

]]>

Why use Yegreena Color Floor Topcoat Epoxy Resin?

Yegreena Color Floor Topcoat is a top coat in two pack epoxy system for metallic colours. It has properties that allow it to mix with the metallic & pearl pigment. It can also be applied as a clear epoxy top coat in woodworking application where a clear top coat is required.

Where to use Yegreena Color Floor Topcoat Epoxy Resin?

Best use for Yegreena Color Floor Topcoat is as a top coat finish for metallic epoxy floor or other applications where a metallic epoxy look is required, such as a river table. With 26+ colour tints to choose from the Yegreena Metallic system form a beautiful and smooth looking surface.

Technical Information

Technical Data Sheet – Yegreena Color Floor Topcoat

Part A Material Safety Data Sheet  – Yegreena Color Floor Topcoat Base

Part B Material Safety Data Sheet -Yegreena Color Floor Topcoat Hardener

 

 

 

 

The post Yegreena Color Floor Topcoat appeared first on Perth Epoxy Supplies.

]]> PROTECH PT-3000 HIGH BUILD https://perthepoxysupplies.com.au/protech-pt-3000-high-build/?utm_source=rss&utm_medium=rss&utm_campaign=protech-pt-3000-high-build Fri, 26 Apr 2019 01:10:15 +0000 https://perthepoxysupplies.com.au/?p=1219 PT-3000 High Build  is a two-component, 91% volume solids, aliphatic polyaspartic coating system

The post PROTECH PT-3000 HIGH BUILD appeared first on Perth Epoxy Supplies.

]]>

What is Protech PT-3000 High Build?

PT-3000 High Build  is a two-component, 91% volume solids, aliphatic polyaspartic coating system.  It is recommended for use over suitably prepared concrete, plywood and steel surfaces as a decorative / protective coating system. It forms a waterproof membrane. It is also recommended as a topcoat for application over compatible aromatic polyurea, polyurethane and epoxy coatings.

Areas to use Protech PT-3000 High Build

  • Domestic Garages and driveways
  • Commercial and industrial concrete and plywood floors
  • Food processing operations
  • Cold storage area floors
  • Chemical plants
  • UV protective coating for compatible aromatic polyurea, polyurethane and epoxy coatings

Features

  • UV RESISTANT FOR Superior Gloss Retention
  • Good Abrasion Resistance
  • High Gloss Level
  • High Tensile Strength
  • Fast Cure
  • Contains UV Absorber
  • High Pigment loading possible provides excellent opacity
  • Ambient Application Temperature range: 2°C to 40°C
  • In – Service Temperature range: -15°C to +90°C

Technical Information

Technical Data & Application Sheet for Protech PT-3000 High Build

Material Safety Data Sheet for Protech PT-3000 High Build Polyaspartic Part A

Material Safety Data Sheet for Protech PT-3000 High Build Polyaspartic Part B

The post PROTECH PT-3000 HIGH BUILD appeared first on Perth Epoxy Supplies.

]]> Noroo Waterbased Urethane Topcoat Polyurethane Two Pack https://perthepoxysupplies.com.au/noroo-waterbased-urethane-topcoat-polyurethane-two-pack/?utm_source=rss&utm_medium=rss&utm_campaign=noroo-waterbased-urethane-topcoat-polyurethane-two-pack Fri, 26 Apr 2019 01:08:13 +0000 https://perthepoxysupplies.com.au/?p=1216 Noroo Waterbased Urethane Topcoat is a water based Two Pack Polyurethane specifically formulated to achieve a smooth, hard wearing surface for concrete and masonry surfaces.

The post Noroo Waterbased Urethane Topcoat Polyurethane Two Pack appeared first on Perth Epoxy Supplies.

]]>

What is Noroo Waterbased Urethane Topcoat?

Noroo Waterbased Urethane Topcoat is a water based Two Pack Polyurethane specifically formulated to achieve a smooth, hard wearing surface for concrete and masonry surfaces. It is suitable for use on areas which require an extremely hard, yet flexible protective coating with excellent UV resistance. Retains colour and gloss, weathering properties and abrasion resistance.

Features

  • Non-Yellowing
  • Hard, very durable coating
  • Good dry and through cure
  • Excellent mark and scuff resistance
  • Excellent chemical resistance
  • Excellent anti-graffiti coating

The post Noroo Waterbased Urethane Topcoat Polyurethane Two Pack appeared first on Perth Epoxy Supplies.

]]> PROTECH PT-3000 https://perthepoxysupplies.com.au/protech-pt-3000/?utm_source=rss&utm_medium=rss&utm_campaign=protech-pt-3000 Fri, 26 Apr 2019 01:04:37 +0000 https://perthepoxysupplies.com.au/?p=1211 PT-3000 is a two-component, 76% solids non-yellowing-type polyaspartic coating system.

The post PROTECH PT-3000 appeared first on Perth Epoxy Supplies.

]]>

What is PROTECH PT-3000?

PT-3000 is a two-component, 76% solids non-yellowing-type polyaspartic coating system.  It is recommended for use over suitably prepared concrete, plywood and steel surfaces as a decorative / protective coating system. It forms a waterproof membrane. It is also recommended as a topcoat for application over compatible aromatic polyurea, polyurethane and epoxy coatings.

Areas to use PT-3000 Polyaspartic

  • Domestic Garages and driveways
  • Commercial and industrial concrete and plywood floors
  • Food processing operations
  • Cold storage area floors
  • Chemical plants
  • UV protective coating for compatible aromatic polyurea, polyurethane and epoxy coatings

Features

  • UV RESISTANT FOR Superior Gloss Retention
  • Good Abrasion Resistance
  • High Gloss Level
  • High Tensile Strength
  • Fast Cure
  • Contains UV Absorber
  • High Pigment loading possible provides excellent opacity
  • Ambient Application Temperature range: 2°C to 40°C
  • In – Service Temperature range: -15°C to +90°C

Technical Information

Technical Data & Application Sheet for PT-3000 Polyaspartic

Material Safety Data Sheet for PT-3000 Polyaspartic Part A

Material Safety Data Sheet for PT-3000 Polyaspartic Part B

The post PROTECH PT-3000 appeared first on Perth Epoxy Supplies.

]]> Noroo Anythane Two Pack Polyurethane https://perthepoxysupplies.com.au/noroo-anythane-two-pack-polyurethane/?utm_source=rss&utm_medium=rss&utm_campaign=noroo-anythane-two-pack-polyurethane Fri, 26 Apr 2019 00:51:22 +0000 https://perthepoxysupplies.com.au/?p=1202 Anythane is a high solids, high build Two Pack Polyurethane specifically formulated to achieve a smooth, hard wearing surface for concrete and masonry surfaces.

The post Noroo Anythane Two Pack Polyurethane appeared first on Perth Epoxy Supplies.

]]>

What is Anythane Polyurethane Acrylic?

Noroo Anythane Polyurethane is a high solids, high build Two Pack Polyurethane specifically formulated to achieve a smooth, hard wearing surface for concrete and masonry surfaces. It is suitable for use on areas which require an extremely hard, yet flexible protective coating with excellent UV resistance. Retains colour and gloss, weathering properties and abrasion resistance.

Features

  • Non-Yellowing
  • High Build
  • Hard, very durable coating
  • Good dry and through cure
  • Excellent mark and scuff resistance
  • Excellent chemical resistance
  • Excellent anti-graffiti coating

Technical Information

Technical Data Sheet – Anythane

Part A Material Safety Data Sheet – Anythane

Part B Material Safety Data Sheet – Anythane

The post Noroo Anythane Two Pack Polyurethane appeared first on Perth Epoxy Supplies.

]]> CLEANPOXY(W) TOP COAT https://perthepoxysupplies.com.au/cleanpoxyw-top-coat/?utm_source=rss&utm_medium=rss&utm_campaign=cleanpoxyw-top-coat Thu, 04 Apr 2019 05:59:22 +0000 https://perthepoxysupplies.com.au/?p=1029 CLEANPOXY(W) TOP COAT Water Based Epoxy is a two part epoxy. This product is intended as an interior layer for solid walls and floors. We supply an opaque white colour but can be tinted with suitable water based tints.

The post CLEANPOXY(W) TOP COAT appeared first on Perth Epoxy Supplies.

]]>

What is CLEANPOXY(WB) TOP COAT Water Based Epoxy?

CLEANPOXY(W) TOP COAT Water Based Epoxy is a two part epoxy. CLEANPOXY(W) TOP COAT Water Based Epoxy is intended for an interior layer for solid walls and floors. We supply an opaque white colour but can be tinted with suitable water based tints.

Where to use CLEANPOXY(WB) TOP COAT Water Based Epoxy?

CLEANPOXY(W) TOP COAT Water Based Epoxy is intended to be used as a primer or as a finished coat for internal concrete walls and floors. This product is regularly applied as a base coat for decorative flake epoxy flooring and on account of its low VOC equation it is also suitable to be used in food and beverage areas. CLEANPOXY(W) TOP COAT Water Based Epoxy can be used as a garage floor paint because of its resilience and easy application.

Technical Information

Technical Data Sheet – Cleanpoxy (WB) Top Coat

Part A – Material Safety Data Sheet Cleanpoxy (WB) Top Coat

Part B – Material Safety Data Sheet Cleanpoxy WB Top Coat

The post CLEANPOXY(W) TOP COAT appeared first on Perth Epoxy Supplies.

]]> DNY 200 Epoxy Primer https://perthepoxysupplies.com.au/dny-200-epoxy-primer/?utm_source=rss&utm_medium=rss&utm_campaign=dny-200-epoxy-primer Thu, 04 Apr 2019 05:54:29 +0000 https://perthepoxysupplies.com.au/?p=1026 DNY 200 is a primer coat that is designed to be used as a primer coat for surface areas such as a warehouse or home garages. It can be coated over with Cleanpoxy 3100 or DHDC 6400 epoxy or a polyurethane such as Anyhthane polyurethane to protect the surface from scratching.

The post DNY 200 Epoxy Primer appeared first on Perth Epoxy Supplies.

]]>

What is DNY-200 Epoxy Primer?

DNY 200 is a primer coat that is designed to be used as a primer coat for surface areas such as a warehouse or home garages. It can be overcoated with Cleanpoxy 3100, DHDC 6400 epoxy or a polyurethane such as Anythane to protect the surface from scratching.

Why use DNY-200 Epoxy Primer?

DNY 200 is a key part of any epoxy system for proper initial coating to assure good adhesion to the surface. Followed with a subsequent epoxy coating like Cleanpoxy 3100 or DHDC 6400 best designed for any indoor concrete surface wanting a epoxy flooring finish.

Features

  • In a clear form
  • Outstanding water resistance
  • Chemical resistant
  • Cures at low temperatures
  • Excellent binder for polymer flooring
  • Impervious to water

Technical Information

Technical Data Sheet DNY-200

Part A Material Safety Data Sheet DNY-200

Part B Material Safety Data Sheet DNY-200

The post DNY 200 Epoxy Primer appeared first on Perth Epoxy Supplies.

]]> DHDC 6400 Epoxy https://perthepoxysupplies.com.au/dhdc-6400-epoxy/?utm_source=rss&utm_medium=rss&utm_campaign=dhdc-6400-epoxy Thu, 04 Apr 2019 04:52:35 +0000 https://perthepoxysupplies.com.au/?p=1018 DHDC 6400 is a top coat finish designed to be used over the top of DNY 200 or DNY 200(E) Epoxy Primer.

The post DHDC 6400 Epoxy appeared first on Perth Epoxy Supplies.

]]>

What is DHDC 6400 Epoxy?

DHDC 6400 is a Top Coat finish designed to be used over the top of DNY 200 or DNY 200(E) Epoxy Primer. It is a part A&B system that comes pre-tinted White or Ash grey .

Why use DHDC 6400 Epoxy?

DHDC 6400 is part of an industrial epoxy kit, using DNY 200 or DNY 200(E) as a primer coat. Best designed for warehouse floor areas or other large indoor concrete high traffic surfaces, requiring an epoxy flooring finish. We recommend using DHDC 6400 as the top coat finish for this system to help protect the surface from scratching.

Features

  • Comes pre-tinted either in White or Ash Grey
  • Outstanding water resistance
  • Chemical resistant
  • Cures at low temperatures
  • Excellent binder for polymer flooring
  • Impervious to water
  • Is possible to tint with a Noroo Epoxy Tint

Technical Information

Technical Data Sheet – DHDC 6400

Part A Material Safety Data Sheet – DHDC 6400

Part B Material Safety Data Sheet – DHDC 6400

The post DHDC 6400 Epoxy appeared first on Perth Epoxy Supplies.

]]>